Crankshaft Pulley Tool
Ford / Volvo 1.8 | 2.0 | 2.3 - 16V Duratec Chain Drive Engines.
For counter holding the crankshaft pulley while
the pulley retaining bolt is loosened or tightened.
Ford : C-MAX | Fiesta | Focus | Galaxy | Mondeo | S-MAX |Transit
Volvo : C30 | S40 | S80 | V50 | V70
OEM Code : 9997218

Ford / Volvo Timing Tool Set
For 1.6L / 2.0L GTDI T4 / T5 V4 Engines
To adjust and fix angle of camshaft and crankshaft.
Applicable Models : S60 | S80 | V40 | V60 | V70 | XC60
Also for Ford cars with 1.6 SCTi / Ti-VCT Eco boost engines.

Ford / Mazda / Volvo
Petrol Engine Setting / Locking Kit
Covers the complete range of Ford Duratec engines
1.25 through to 2.3 16V in both belt and chain drive variants.
Also suitable for Duratec engines in Mazda and Volvo vehicles.
See detail page for full list of vehicles and engine codes.

Ford Timing Tool Set
for Ford / Mazda / PSA / Volvo
For setting engine timing when replacing the camshaft or cylinder head gasket.
Camshaft locking pin. Flywheel locking bolt
Crankshaft / high pressure pump locking pin.
PSA - Citroen / Peugeot 1.4 / 1.6 Hdi
Mazda 1.4CiTD
Ford 1.4TDCi / 1.6TDCi
Volvo 1.6D

Engine Timing Tool Set
for Renault / Volvo 16V and 20V Petrol Engines
with 1.6 | 1.8 | 1.9 | 2.0 | 2.3 | 2.4 | 2.5 litre twin cam engines.
Applicable to Renault Laguna / Safrane and Volvo vehicles

Renault Timing Tool Set
Petrol 1.2 | 1.4 | 1.6 | 1.8 | 2.0 | 16V | 2.5 20V DOHC
Clio | Espace | Kangoo | Laguna | Megane
Rapid | Safrane | Scenic | Trafic | Twingo
also Diesel 1.9 | 2.5 | 2.8
Opel Arena / Movano and Volvo V/S 40

VAG Timing Tool Set
Setting and Locking Kit
Tools for locking top dead centre and
setting tools to re-check correct alignment
on Petrol and Diesel Engine Vehicles
Applicable to : PSA / VAG and Volvo.

Volvo Camshaft Belt Tool Kit
Used for the replacement of the camshaft drive belt
on popular Volvo 2.0L and 2.5L - 5 cylinder diesel engines.
Like - C30 | C70 | S40 | S60 | S80 | V40 | V50 | V60 | V70 | XC70 range.
With Crankshaft Pulley Holding Tool
Camshaft and Crankshaft Locking Pins

Timing Tool Set
for Volvo and Land Rover Vehicles.
with 3.0 and 3.2 T6 Engines as of 2007
and Land Rover Freelander 3.2 / i6 2006 onwards
Camshaft and Crankshaft locking tools
for checking and adjusting the engine timing on
Applicable to : Volvo S80 | XC90 | XC60 | XC70

Volvo / Ford Timing Tool Set
for 1.6 | 2.5 | 2.4D Engines
For setting the camshaft and crankshaft timing
when replacing the cylinder head gasket.
Crankshaft Holding Wrench
Camshaft Timing Tool
Crankshaft Timing Tool
Camshaft Holder

Volvo Timing Tool Set
For 4 | 5 | 6 Cylinder Engines up to 2006
Camshaft / Crankshaft Alignment Tool Kit
Camshaft Cover Tool
Camshaft Alignment Tool
Crankshaft Locking Tool
Retaining Tool

Volvo Timing Tool Set
for 2.0 Diesel Engines / 2013 - 2018
Provides the tools to lock and hold the
Crankshaft and High Pressure Fuel Pump.

S60 / 2013 - 2018 | S80 / 2013 - 2016 | S90 / 2016
V40 / 2014 - 2019 | V60 / 2013 - 2018 | V70 / 2013 - 2016 | V90 / 2016
XC40 / 2017 - | XC60 / 2013 | XC70 / 2013 - 2016 | XC90 / 2014 -
2.0L Diesel D4204T
OEM Codes : 9997495 | 9997233

Volvo Timing Tool Set
for B4204 8 Speed Transmission Engines.
For aligning the camshaft and crankshaft and
working on valve drive and renewing the cylinder head gasket.
Belt Pulley Counter Holding Tool
Crankshaft Wheel Puller
Radial Seal Ring Mounting Tool
Camshaft Sprocket Tool
Camshaft Alignment Tool